I made a Cylindrical box for storing my leftover spices. So i made it, sliced it and let it to print. It was a H: 100mm , R: 60mm.
On roughly about 20mm i changed the speed of the printer to just 25%.
I found out that at 25% of the speed the print lines are shiny and when i resumed the print after few mm i got that dull look.
So if you want to prints to come out shiny use low speeds. under 40mm/s for outer shell.
But there is a catch since it is running slowly the more material will come out of the nozzle and you have to adjust the flow rate for it.
Leave a Reply