Using USBASP V2.0 AVR Programmer with Raspberry Pi 3

Posted

October 4, 2021

Abhay Kant

Tags:

Raspberry pi or Rpi can be used for programming certain AVR microcontrollers. I have made a video showing you the steps.

Step 1: you have to install AVRDUDE

sudo apt-get install avrdude -y

Step 2: You can check if the avrdude is installed properly or not using

avrdude

step 3: connect your USBASP v2.0 to your microcontroller

avrdude -c usbasp -p m32

Microcontroller Programmed:

Atmega32, atmega32a, Atmega16, Atmega16a,

Comments